PM&I: Oil Filtration Systems: Spinner II TF Hudgins Oil Centrifuge:

Pacific Marine & Industrial

MANUFACTURING ◊ DISTRIBUTION ◊ SERVICE

Info@PacificMarine.net ◊ EnEspanol@PacificMarine.net ◊

How PM&I Can Help Prevent Delays

Free Classified Equipment Ads: Global & Comprehensive

Purchase ONLINE Select Products Only

Spinner II TF Hudgins Oil Purifier Oil Centrifuge
Spinner II Oil Purifier Model Application Guide

How Spinner II Oil Purifier Works

Spinner II Oil Purifier Flow Path

Spinner II Oil Purifier Installation Photos - Various Applications

Application Case Studies - Spinner II Oil Purifier

How to Size: Recirculate Your Oil Sump 4 to 5 Times Per Hour


Spinner II Oil Purifier Model 25	Spinner II Oil Purifier Model 936	Spinner II Oil Purifier Model 560
Flow .8 GPM / 3 LPM	Flow 1 GPM / 3.8 LPM	Flow 2 GPM / 7.6 LPM
Re-Useable Rotor	Re-Usable Rotor	Disposable Rotor (No Bowl Cleaning)
No Paper Insert	Paper Insert to Assist in Cleaning	With or Without LCB
Up to 250cc of Contaminants	Up to 360cc of Contaminants	Up to 500cc of Contaminants


Spinner II Oil Purifier Model 596	Spinner II Oil Purifier Model 996	Spinner II Oil Purifier Model 200
Flow 2 GPM / 7.6 LPM	Flow 2 GPM / 7.6 LPM	Flow 4 GPM / 15.1 LPM
Disposable Rotor	Re-Useable Rotor	Re-Useable Rotor
No Bowl Cleaning Needed	Paper Insert to Assist in Cleaning	Paper Insert to Assist in Cleaning
With and Without LCB	Up to 900cc of Contaminants	With or Without LCB
Up to 500cc of Contaminants		Up to 2,000cc of Contaminants


Spinner II Oil Purifier Model 3400	Spinner II Oil Purifier Model 3600	Spinner II Oil Purifier Parallel Systems
Flow 8 GPM / 30.3 LPM	Flow 16 GPM / 60.6 LPM	Larger Flow Rates
Re-Useable Rotor	Re-Useable Rotor
Paper Insert to Assist in Cleaning	Paper Insert to Assist in Cleaning
With or Without LCB	With or Without LCB
Up to 4,000cc of Contaminants	Up to 6,000cc of Contaminants

Centrifugal Oil Purification System - Removes Particles Down to .1 Micron
Extends Oil Change Interval - Extends Engine Life

Operates on engine oil pressure

For: Engine lubricants, gear oils, machining fluids, hydraulic oils, quench oils

Engine mounted or side mounted
Operates on oil pressure only
Remove particles down to 1/10 of a micron
Remove carbon and soot
Use in addition to your full flow filter system
Stand alone pump assisted units available

Protects Machinery:
Reduces wear up to 50%
Increases engine / component life
Helps reduce frequency of maintenance and repair

Extends Operating Intervals
Keeps fluids and additives effective longer
Prolongs full flow filter life
Centrifuge requires minimal service

Eliminates Waste
Permanent, cleanable and reusable
No media or filter element to replace
Protects the environment by reducing disposable waste