Marine Oil Water Separators

Specification Sheet

Specifications	2 GPM	5 GPM	10 GPM	25 GPM	45 GPM
Height (inch/cm)	48(122)	56(142)	72(183)	74(188)	80(203)
Width (inch/cm)	26(66)	28(71)	36(91)	40(102)	54(137)
Depth (inch/cm)	42(107)	46(117)	60(152)	78(198)	96(244)
Dry Weight(lbs./kilogram)	700(318)	850(386)	1500(680)	2500(1135)	4000(1816)
Capacity gpm (M3/hr)	2(.45)	5(1.13	10(2.27)	25(5.68)	45(10.22)
Activated Carbon Media charge (lbs./kg)	60(27)	110(50)	250(114)	500(227)	1000(454)
Organoclay/Sand charge (lbs./Kg)	92(42)	185(84)	365(166)	730(331)	1500(662)
Pipe connections In/Out	¾" – ¾"	1" – ¾"	1 ½" – 1"	1 ½" -1 ½"	2" – 1 ½"

For all units:

Specifications	Value
IMO MEPC Compliance	107(49)
Test PSIG	45
Operating Pressure	15 PSIG
Operating Temp Range	5-60 C
Max Free Oil Concentration	35%
Max Fluid "C" Oil Concentration (with filter)	6%
Oil in Water Discharge with TPH	<15 ppm
Single Phase Power Options	110/120vac 220vac
Three Phase Power Options	210/220vac 380/415vac 460/480vac 575/600vac
DC Power Options	12 or 24
Frequency	50 or 60 Hz
Max Amperage	< 15 amps
Max Turbidity for Accurate TPH Reading	35 NTU
Design Negative Inlet Head (Ft/M)	9 (2.8)
Positive Inlet Head Design Pressure (Motorized Valve Req'd)	15 PSIG
Level Sensor	Conductance
Pump	Centrifugal w SS Housing
Coalescing Media	Polypropylene/HDPE
Hazardous Area Classification	Nema 4X or Class I Div II
Coating Specification	Epoxy/Urethane
Piping and Manual Valves	Bronze / Red Brass
Vessel Metallurgy	Marine Coated Carbon Steel

California ◊ Florida ◊ Shanghai ◊ Germany

Lagos Nigeria ◊ Valparaiso Chile ◊ Dubai UAE

Trusted Since 1985

Pacific Marine & Industrial is
a registered service mark of:

Quality Pacific Manufacturing, Inc.